Search in Category
Filter Your Search
Accessory Type
Amperage Rating (A)
Color
Control Voltage
Dimensions
Domestic/Import
Electrical Ratings
Enclosure Type
Indicator Type
Modes of Protection
Mounting Type
Nominal Discharge Current (A)
Number of Poles
Number of Wires
Peak Surge Current (A)
Phase
Response Time
Short Circuit Current Rating (A)
Suitable For Use With
Time Delay
Voltage Rating (VAC)
Brand
Shop by Category
Accessories / Misc
HARD START KIT 208 TO 240VAC
Reduce the amount of time required to stabilize the compressor during start up and you will reduce the length of time the compressor is exposed to damaging heat. 5-2-1® Compressor Saver® accomplishes this by providing your compressor with a precise “boost” during the critical start up period. As a result, the compressor stabilizes faster, length of exposure to damaging electrical heat is reduced and ultimately the compressor life is extended.
PROTECTOR MTR DIG 70 TO 325V 90 TO 300V
Automatic voltage monitor and control system. Continuously measures incoming line voltage, allowing detection of any voltage outside the tolerances that you set. If these limits are exceeded, the response timer begins counting. You may also set response time – a short time for a quick response or a long time to avoid nuisance tripping. If the voltage remains outside the tolerance after the time has elapsed, the DSP-1 will turn off its output relay and protect your device. While output is off, an additional delay timer activates to avoid rapid restarts.
OUTLET SEAL PENE WALL PVC GRY DOM TGS
AIREX TITAN OUTLET™ – Professionally Engineered and with an Architectural aesthetic finish design, features a Wall Outlet Enclosure with excellent weather proofing capabilities that fits over and seals around wall surface piping penetrations, utilizing elastomeric gaskets and seals, as required by building, energy, and mechanical codes. AIREX TITAN OUTLET™ prevents wall gaps and exterior surface cracks associated with the use of rigid wall penetration sleeves or rigid penetration flashing materials. Featuring a combined fastener and gasket/seal applied compression-force system that accomplishes simultaneous, solid, internal wall structure attachment and all-surface wall gasket mounting for long-term sustainable and effective air leakage sealing. An integral over-molded Flexible Elastomeric Sleeve, seals the refrigerant piping and insulation, creating an air leakage seal, that permanently supports the refrigerant piping at the point of equipment service areas, professionally engineered
