Testing

SKU: ATB1

The ATB1, K-type bead thermocouple is used to take temperatures of air, surfaces, or liquids up to 400 deg F. Use the ATB1 for outdoor dry bulb temperatures when finding target superheat. The ATB1 can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple. The wrap-tab allows the thermocouple wire to conveniently store on the plug. Just wrap the excess wire around the wrap-tab and feed it through one of the eyes. Keep a few of them set at different lengths for fast, job-specific, switching between thermocouples. No more tangled messes in your tool bag.

SKU: BG44

The elevated interior tool rack houses hand tools for easy access and quick visibility so missing tools don’t get left behind. Special accessories include a magnetic tray, water bottle/wasp spray strap, electrical tape strap, small plastic tray storage in bottom and drill holster. This compact, rugged bag fits snugly to the body to easily maneuver in tight places like crawl spaces and ladder cages. For the most common HVACR tools used in the field everyday, BG44 has a place for everything and everything has a place.

SKU: JL3KR4

Connect two pressure probes and two pipe temperature clamps to immediately see system charge on your Job Link® system mobile app. Easily determine if unit is running properly or if troubleshooting is needed. All measurements can be sent up to 1000 ft away directly your mobile device. Each tool is designed for agility and speed. The pressure probe fits into tight spaces. The pipe clamp uses a new Rapid Rail™ sensor design to deliver accuracy, speed and agility, even on the most awkward pipe configurations. Do more with Job Link® probes!.

SKU: ADK7

The ADK7 deluxe silicone lead is the optimal way to test most electrical parameters you run into during field service. The kit includes the ADLS2 silicone leads and ASA2 alligator leads plus RCT2 probe tips. HVAC techs often remove the black probe tip (common) and insert the black alligator lead for an extended reach from ground. When used with our stick meters, the Volts (red) probe tip is inserted into the top of the meter for easy one-handed testing. Use both alligator extension to perform “no-hands” tests. Silicone test leads deliver better performance in temperature extremes than test leads insulated with vinyl.

SKU: JL3PR

The JL3PR Job Link® system Pressure Probe sends long range wireless pressure measurements directly to the Fieldpiece Job Link® system mobile app. Easily reach service ports in tight spaces using the angled 1/4 in fitting. The rubberized protective housing is both ergonomic and rugged for daily use. Flip the switch to red or blue and the app immediately knows which side of the system you’re going to place your Pressure Probe. The perfect balance of size and capability gives you exactly what you need to diagnose systems day in and day out quickly and confidently.

SKU: SC480

Your SC480 is the essential Clamp Meter with wireless functionality for the HVACR professional. Send your electrical measurements directly to the Job Link® system mobile app. Leave the meter behind a closed blower door and view the current measurement on your mobile device. Help determine system efficiency by directly measuring power consumption (W) of the system. Use this value to inform your customer of energy saving measures you can take to help them save money on their energy bills. The SC480 is great for troubleshooting mini-split systems. Reach those cramped mini-split connectors with the included RCT2 probe tips for voltage and resistance measurements. Plus, measure frequency (Hz) directly with clamp jaw. Hang your SC480 Clamp Meter to any metallic surface with the heavy-duty magnet. See both voltage and amperage readings at the same time on the big dual display. Verify the order of 3-ph voltage lines with just two leads. Capture L1-L2 and L1-L3 to check that motor lines are cor

SKU: T-68W-5

SKU: ADLS2

The ADLS2 lead set features gold plated tips, removable tip sheaths, high copper strands and are silicone insulated. They offer basket style strain relief and fit inside the test lead holders on all of out meters that have built-in holders. They’re rugged and stand up to high and low temperatures better than traditional vinyl test leads and don’t become brittle in extreme cold.

SKU: SCM4

The SCM4 carbon monoxide (co) detector has a very fast reaction time and measures co in parts per million (ppm). Its electrochemical sensor is fast enough for walk-around tests. Features and benefits include: field-replaceable co sensor, advanced three-pin sensor measures 0 to 1000 ppm co, calibrate/zero SCM4 to ambient quickly with the zero button, audio and visual alarms with mute, bright blue, backlit dual-display with max and real-time measurements displayed, magnetic hanger for hands-free operation, auto power-off (APO).

SKU: NTF66